To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
17410
1.REMOVE FRONT EXHAUST PIPE ASSEMBLY
17578B
2.REMOVE PIPE CLAMP
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the 3 bolts and pipe clamp from the engine cover bracket.
12631A
3.REMOVE ENGINE COVER BRACKET
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Detach the 2 clamp and disconnect the engine wire from the engine cover bracket.
Remove the 2 bolts and engine cover bracket from the cylinder head sub-assembly.
17167
4.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the 3 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold.
17271
5.REMOVE NO. 1 TURBO INSULATOR
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the 3 bolts and No. 1 turbo insulator from the exhaust manifold and turbocharger sub-assembly.
17118
6.REMOVE NO. 2 EXHAUST PIPE SUPPORT STAY
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the bolt, 2 nuts and No. 2 exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.
17118
7.REMOVE EXHAUST PIPE SUPPORT STAY
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the 3 bolts and exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.
25051
8.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Remove the nut, exhaust pipe clamp and exhaust manifold converter sub-assembly from the turbocharger sub-assembly.
Remove the gasket.