Home › Engine / Hybrid System › 1GR-FE COOLING › RADIATOR › from 2016.10
RM33K0E _51 Engine / Hybrid System _043581 1GR-FE COOLING _0220977 RADIATOR A

1GR-FE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16400B 1.INSTALL RADIATOR DRAIN COCK PLUG

a.

Install a new O-ring to the radiator drain cock plug.


b.

Install the radiator drain cock plug to the radiator assembly.


Hide 16400 2.INSTALL RADIATOR ASSEMBLY

a.

Set the radiator assembly to the vehicle.


b.

Attach the 2 guides and 2 claws to connect the cooler condenser assembly to the radiator assembly.

NOTICE:
·

Do not apply any excessive force to the cooler condenser assembly and cooler pipe.

·

Do not allow the radiator assembly to interfere with other parts.




c.
A341296C03
2.667,1.833 2.833,1.833 2.833,1.833 2.958,1.552 true 2.833,0.25 2.667,0.25 2.667,0.25 2.75,0.5 true 2.5,1.75 2.729,1.948 0.229,0.198 10 true *a 2.875,0.156 3.104,0.354 0.229,0.198 10 true *a
*a Claw


Hook the claw of the radiator assembly as shown in the illustration.


d.
A344518N01
2.76,0.76 2.865,0.958 0.104,0.198 10 true 1 0.573,0.75 0.729,0.948 0.156,0.198 10 false 2 2.792,1.229 2.896,1.417 0.104,0.188 10 true 3 0.583,1.292 0.74,1.49 0.156,0.198 10 false 4

Install the radiator assembly with the 4 bolts in the order shown in the illustration.

Torque:
22 N*m (224 kgf*cm, 16 ft.*lbf)


Hide 16711 3.INSTALL FAN SHROUD

a.

Install a new clamp to the fan shroud.


b.

Install the fan pulley to the engine water pump assembly.


c.

Place the shroud together with the coupling fan between the radiator assembly and engine.

NOTICE:

Be careful not to damage the radiator core.



d.
A391861C01
1.188,0.333 1.406,0.333 1.406,0.333 2.094,0.802 true 0.906,0.958 0.635,0.781 0.635,0.781 0.5,0.781 true 0.333,0.677 0.542,0.844 0.208,0.167 10 false *a 1,0.229 1.208,0.396 0.208,0.167 10 false *a
*a Paint Mark


Align the paint marks on the head of the engine water pump stud bolt with the paint marks of the same color on the outer edge of the fluid coupling flange and set the fluid coupling to the engine water pump assembly.


e.

Temporarily install the fan with fluid coupling to the engine water pump assembly with the 4 nuts. Tighten the nuts as much as possible by hand.


f.
A349954

Attach the 2 guides and 2 claws to install the fan shroud to the radiator assembly as shown in the illustration.


g.

Install the fan and generator V belt.

Click hereEngine / Hybrid System>1GR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION


h.

Tighten the 4 nuts of the fluid coupling fan.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


i.
A344517

Attach the 6 clamps to the radiator assembly and fan shroud to connect the wire harness.


j.

Connect the vane pump oil reservoir assembly to the radiator assembly and fan shroud with the 3 bolts.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 16470 4.INSTALL RADIATOR RESERVOIR

a.

Install the radiator reservoir and grommet with the 2 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Connect the reservoir hose to the radiator assembly.


Hide 32941 5.CONNECT NO. 1 OIL COOLER INLET HOSE

a.

Connect the No. 1 oil cooler inlet hose to the radiator assembly, and slide the hose clamp to secure the hose.

NOTICE:

Connect the No. 1 oil cooler inlet hose to the radiator assembly so that the paint mark on the No. 1 oil cooler inlet hose is facing upwards.



Hide 32942 6.CONNECT NO. 1 OIL COOLER OUTLET HOSE

a.

Connect the No. 1 oil cooler outlet hose to the radiator assembly, and slide the hose clamp to secure the hose.

NOTICE:

Connect the No. 1 oil cooler outlet hose to the radiator assembly so that the paint mark on the No. 1 oil cooler outlet hose is facing upwards.



Hide 16571 7.INSTALL RADIATOR HOSE INLET

a.
A355208C01
0.917,2.583 1.417,2.583 1.417,2.583 1.594,2.76 true 1.938,2.75 2.292,2.594 2.292,2.594 2.479,2.594 true 0.698,2.49 0.906,2.688 0.208,0.198 10 false *a 2.521,2.521 2.729,2.719 0.208,0.198 10 false *b
*a Paint Mark
*b Protrusion


Install the radiator hose inlet to the radiator assembly and water inlet assembly, and slide the 2 hose clamps to secure the hose.

NOTICE:

Connect the radiator hose inlet so that the paint mark on the radiator hose inlet is aligned with the protrusion of the radiator assembly and the machined edge of the engine as shown in the illustration.



Hide 16572 8.INSTALL RADIATOR HOSE OUTLET

a.
A355209C01
1.01,2.563 1.479,2.563 1.479,2.563 1.625,2.75 true 1.938,2.74 2.344,2.531 2.344,2.531 2.552,2.531 true 0.802,2.479 1,2.688 0.198,0.208 10 false *a 2.583,2.458 2.802,2.646 0.219,0.188 10 false *b
*a Paint Mark
*b Protrusion


Install the radiator hose outlet to the radiator assembly and water inlet assembly, and slide the 2 hose clamps to secure the hose.

NOTICE:

Connect the radiator hose outlet so that the paint mark on the radiator hose outlet is aligned with the protrusions of the radiator assembly and water inlet as shown in the illustration.



b.

Attach the clamp to the radiator hose outlet.


Hide 16593 11.INSTALL NO. 1 RADIATOR AIR GUIDE

a.

Install the radiator air guide with 4 new clips.


Hide 51410 12.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 53293C 13.INSTALL RADIATOR SIDE DEFLECTOR