Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM3250E _51 Engine / Hybrid System _037981 1GR-FE ENGINE CONTROL _0176371 CAMSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 22030 1.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

Hide 11301M 2.REMOVE VVT SENSOR (for Bank 1)

a.
A356031

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor.


Hide 11301M 3.REMOVE VVT SENSOR (for Bank 2)

a.
A356032

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor.