Home › Vehicle Interior › HEATING / AIR CONDITIONING › COOLER EXPANSION VALVE
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0178612 COOLER EXPANSION VALVE A

HEATING / AIR CONDITIONING  COOLER EXPANSION VALVE  INSTALLATION  


PROCEDURE

Hide 88515 1.INSTALL COOLER EXPANSION VALVE

a.

Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

Compressor Oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.

Temporarily install the cooler expansion valve.


d.

Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 88710E 2.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (for 1GD-FTV, 2GD-FTV)

a.
E319139

Remove the vinyl tape from the air conditioner tube and accessory assembly.


b.

Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the 2 O-rings.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



d.

Connect the air conditioner tube and accessory assembly.


e.

Rotate the hook connector in the direction indicated by the arrow in the illustration and install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 88710E 3.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (except 1GD-FTV, 2GD-FTV)

Hide 88707 4.CONNECT SUCTION PIPE SUB-ASSEMBLY (except 1GD-FTV, 2GD-FTV)

a.
E319143C01
0,0 0,0 false
V113147

Install in this Direction


Remove the vinyl tape from the suction pipe sub-assembly.


b.

Sufficiently apply compressor oil to new O-ring and fitting surface of the suction pipe sub-assembly.

Compressor Oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the suction pipe sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surfaces free of foreign matter.



d.

Connect the suction pipe sub-assembly.


e.

Rotate the hook connector in the direction indicated by the arrow in the illustration and install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 5. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT