Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55302A
1.REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
55084E
2.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55085
3.REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
86808A
4.REMOVE NO. 2 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
Detach the clamps.
Disconnect the connector and remove the No. 2 navigation antenna cord sub-assembly.
55844
5.REMOVE NO. 2 HEATER TO REGISTER DUCT
86860
6.REMOVE NAVIGATION ANTENNA ASSEMBLY
Remove the 3 screws.
Detach the claws and remove the navigation antenna assembly.