Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Steel Type Bumper)
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0184372 FRONT BUMPER(for Steel Type Bumper) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Steel Type Bumper)  REASSEMBLY  


PROCEDURE

Hide 81482C 1.INSTALL FOG LIGHT COVER LH (w/ Fog Light)

a.
B412723C01
1.458,3.99 1.688,3.875 false
V113147

Install in this Direction


Attach the claw to install the fog light cover LH as shown in the illustration.


b.

Install the 2 screws.


Hide 81481E 2.INSTALL FOG LIGHT COVER RH (w/ Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52128C 3.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

a.
B412724C01
1.385,4.01 1.615,3.938 false
V113147

Install in this Direction


Attach the claw to install the front bumper hole cover LH as shown in the illustration.


b.

Install the 2 screws.


Hide 52127D 4.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 81220 5.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 6.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure described for the LH side.


Hide 52104A 7.INSTALL FRONT CENTER BUMPER SUB-ASSEMBLY

a.

Install the front center bumper sub-assembly with the 3 nuts as shown in the illustration.

B414798C01
0.073,0.052 0.385,0.25 0.313,0.198 10 false *A 3.542,0.073 3.854,0.271 0.313,0.198 10 false *B
*A for Standard Body *B for Wide Body
V113147

Install in this Direction - -


Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 52113D 8.INSTALL FRONT BUMPER EXTENSION LH

a.
B414802C01
0.073,0.073 0.385,0.271 0.313,0.198 10 false *A 0.094,2.448 0.406,2.646 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body
V113147

Install in this Direction


Attach the guide to install the front bumper extension LH as shown in the illustration.


b.
B414800C01
0.073,0.052 0.385,0.25 0.313,0.198 10 false *A 0.104,2.531 0.417,2.729 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body


Install the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.
B414799C01
0.063,0.094 0.375,0.292 0.313,0.198 10 true *A 0.083,2.552 0.396,2.75 0.313,0.198 10 true *B
*A for Standard Body
*B for Wide Body


Install the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.
B414796C01
0.115,0.052 0.427,0.25 0.313,0.198 10 false *A 0.125,2.51 0.438,2.708 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body


Install the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 52112D 9.INSTALL FRONT BUMPER EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 53901B 10.INSTALL FRONT VALANCE PANEL SUB-ASSEMBLY

a.

Attach the clip to install the front valance panel sub-assembly as shown in the illustration.

B414795C01
0.063,0.063 0.375,0.26 0.313,0.198 10 false *A 3.531,0.052 3.844,0.25 0.313,0.198 10 false *B
*A for Standard Body *B for Wide Body
V113147

Install in this Direction - -



b.
B414793C01
1,0.167 1.25,0.167 false 1.979,0.729 2.229,0.729 false 2.208,2.302 2.458,2.302 false 0.896,1.719 0.896,1.885 false 0.99,2.396 1.24,2.396 false 1.979,2.958 2.229,2.958 false 2.313,4.552 2.563,4.552 false 0.865,3.917 0.865,4.083 false 0.063,0.031 0.375,0.229 0.313,0.198 10 false *A 0.083,2.375 0.396,2.573 0.313,0.198 10 false *B 1.333,0.052 1.646,0.25 0.313,0.198 10 false *a 2.271,0.635 2.583,0.833 0.313,0.198 10 false *a 1.302,2.281 1.615,2.479 0.313,0.198 10 false *a 2.26,2.865 2.573,3.063 0.313,0.198 10 false *a 0.823,1.917 1.135,2.115 0.313,0.198 10 false *b 2.479,2.208 2.792,2.406 0.313,0.198 10 false *b 2.594,4.458 2.99,4.635 0.396,0.177 10 false *b 0.792,4.115 1.104,4.313 0.313,0.198 10 false *b
*A for Standard Body
*B for Wide Body
*a Bolt
*b Screw


Install the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Install the 2 screws and 3 clips.