Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81220
1.INSTALL FOG LIGHT ASSEMBLY LH
Attach the guide to install the fog light assembly LH.
| *A | for Steel Type Bumper | *B | for Resin Type Bumper |
Install the 3 screws.
| *A | for Steel Type Bumper | *B | for Resin Type Bumper |
2.INSTALL FRONT BUMPER COVER
for Steel Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Steel Type Bumper)>INSTALLATION
for Resin Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Resin Type Bumper)>INSTALLATION
3.ADJUST FOG LIGHT AIMING