Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185611 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  INSTALLATION  


PROCEDURE

Hide 71512S 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)

HINT:
·

Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.

·

As shown in the illustration, fix all of the cover seam allowances in the same direction.


B394024E01
2.5,0.24 3.271,0.438 0.771,0.198 10 false A - A 4.656,0.302 5.427,0.5 0.771,0.198 10 false B - B 0.198,0.396 0.354,0.594 0.156,0.198 10 false A 0.51,0.583 0.656,0.75 0.146,0.167 10 true A 0.938,0.802 1.094,1 0.156,0.198 10 false B 1.26,1.063 1.656,1.406 0.396,0.344 10 false B


a.

Temporarily install the separate type front seat cushion cover to the separate type front seat cushion pad.


b.

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings in the order shown in the illustration.

B405994C01
5.354,1.656 5.25,2.188 false 4.99,0.906 5.115,0.927 true 5.146,2.219 5.458,2.375 0.313,0.156 10 false *1 2.531,1.771 2.76,1.927 0.229,0.156 10 true (1) 5.125,0.823 5.438,0.979 0.313,0.156 10 false *a 2.031,1.76 2.271,1.927 0.24,0.167 10 true (2) 2.479,1.115 2.74,1.333 0.26,0.219 10 true (3) 2.052,1.125 2.302,1.344 0.25,0.219 10 true (4) 1.365,1.833 1.594,2.031 0.229,0.198 10 true (5) 1.469,1.375 1.719,1.604 0.25,0.229 10 true (6) 1.469,1.115 1.688,1.354 0.219,0.24 10 true (7) 1.469,0.813 1.698,1.031 0.229,0.219 10 true (8) 1.469,0.552 1.698,0.74 0.229,0.188 10 true (9) 3.135,1.844 3.427,2.042 0.292,0.198 10 true (10) 3.083,1.385 3.458,1.583 0.375,0.198 10 true (11) 3.073,1.125 3.365,1.344 0.292,0.219 10 true (12) 3.063,0.823 3.385,1.042 0.323,0.219 10 true (13) 3.063,0.563 3.677,0.76 0.615,0.198 10 true (14) 2.74,0.188 3.042,0.385 0.302,0.198 10 true (18) 2.125,0.177 2.448,0.365 0.323,0.188 10 true (16) 1.792,0.188 2.094,0.385 0.302,0.198 10 true (15) 2.427,0.188 2.688,0.396 0.26,0.208 10 true (17)
*1 Hog Ring Pliers - -
*a Cutout - -



c.

Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.

HINT:
·

Do not dirty or damage the separate type front seatback cover.


·

Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.



B405995C01
5.198,1.583 4.885,1.99 false 4.771,2.021 5.083,2.219 0.313,0.198 10 false *1
*1 Hog Ring Pliers - -



Hide 2.INSTALL SEAT CUSHION COVER WITH PAD (for Separate Seat Type)

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 71013S 3.INSTALL FRONT SEAT BACK FRAME SUB-ASSEMBLY RH (for Separate Seat Type)

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 73230 4.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Separate Seat Type)

Hide 71861 5.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Separate Seat Type)

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 71811D 6.INSTALL FRONT SEAT CUSHION SHIELD RH (for Separate Seat Type)

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 72525A 7.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Separate Seat Type)

HINT:

Use the same procedure as for the driver seat.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY


Hide 71512S 8.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)

HINT:
·

Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.

·

As shown in the illustration, fix all of the cover seam allowances in the same direction.


B402766N01
0.625,0.313 0.781,0.479 0.156,0.167 10 true A 0.844,0.448 1,0.615 0.156,0.167 10 true A 2.01,0.875 2.167,1.042 0.156,0.167 10 true B 2.25,1.021 2.406,1.188 0.156,0.167 10 true B 3.01,0.271 3.781,0.469 0.771,0.198 10 false A - A 5.25,0.281 6.021,0.479 0.771,0.198 10 false B - B


a.

Set the separate type front seat cushion cover.


b.

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 7 new hog rings in the order indicated in the illustration.

NOTICE:
B402759C01
1.854,0.813 2.01,0.604 false 1.104,0.813 1.26,0.604 false 1.854,0.813 1.667,0.594 false 1.094,0.823 0.906,0.604 false 1.906,1.594 1.646,1.313 false 1.906,1.594 2.167,1.323 false 1.906,1.594 1.896,1.302 false 1.677,4.281 1.646,3.979 false 1.177,3.198 0.927,3.146 true 1.76,0.833 2.219,1.031 0.458,0.198 10 false (2) 1.833,1.604 2.292,1.802 0.458,0.198 10 false (1) 1.021,0.844 1.479,1.042 0.458,0.198 10 false (2) 1.646,4.323 1.958,4.521 0.313,0.198 10 false *1 1.167,3.094 1.479,3.292 0.313,0.198 10 false *a
*1 Hog Ring Pliers
*a Cutout


·

Be careful not to damage the separate type front seat cushion cover.


·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.



HINT:

Install the hog rings at the cutouts if they are there.



Hide 9.INSTALL SEAT CUSHION COVER WITH PAD (for Bench Seat Type)

Hide 10.INSTALL SEATBACK COVER WITH PAD (for Bench Seat Type)

Hide 71861 11.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Bench Seat Type)

Hide 71811D 12.INSTALL FRONT SEAT CUSHION SHIELD RH (for Bench Seat Type)

Hide 72525A 13.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Bench Seat Type)

Hide 14.INSTALL FRONT SEAT ASSEMBLY RH (for Separate Seat Type)

Hide 15.INSTALL FRONT SEAT ASSEMBLY RH (for Bench Seat Type)