Home › Vehicle Exterior › WINDOW / GLASS › QUARTER WINDOW GLASS(for Smart Cab)
RM3250E _59 Vehicle Exterior _038075 WINDOW / GLASS _0185635 QUARTER WINDOW GLASS(for Smart Cab) A

WINDOW / GLASS  QUARTER WINDOW GLASS(for Smart Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 67874G 1.INSTALL FRONT QUARTER WINDOW WEATHERSTRIP LH

a.

Apply Primer G to the front quarter window weather strip LH installation area on the quarter window glass LH.

NOTICE:

Do not apply too much Primer G.



b.

When removing the peeling paper of a new front quarter window weather strip LH, make sure that it does not contact the adhesive surface.

NOTICE:

Install the front quarter window weather strip LH after Primer G has been allowed to dry (approximately 3 min).



c.

Install the front quarter window weather strip LH to the quarter window glass LH in the location shown in the illustration.

B416249C01
0.729,0.802 1.5,1 0.771,0.198 10 false A - A 6.76,0.49 6.844,0.688 0.083,0.198 10 true a 5.135,0.896 5.292,1.094 0.156,0.198 10 true A 5.656,0.917 5.813,1.115 0.156,0.198 10 false A 0.063,0.042 0.375,0.24 0.313,0.198 10 false *a
*a Back of Quarter Window Glass LH - -
V100155

Double-sided Tape - -


Standard:
Area Measurement
a 0.5 to 1.5 mm (0.0197 to 0.0596 in.)



Hide 62742 2.INSTALL QUARTER WINDOW WEATHERSTRIP LH

Hide 62732E 3.INSTALL QUARTER WINDOW HINGE LH

a.
B415212C01
2.948,0.552 3.104,0.75 false 2.771,0.969 2.573,0.781 false 2.656,1.698 2.813,1.906 false 3.031,1.458 3.177,1.708 false 1.531,1.5 1.75,1.688 true 1.594,2.479 1.833,2.698 false 0.76,1.958 0.875,2.219 false 0.427,2.125 0.542,2.396 false 0.875,2.854 1.146,2.979 false 0.5,3.042 0.844,3.198 false 1.792,1.698 2.042,1.875 0.25,0.177 10 true *1 2.792,0.99 3.104,1.146 0.313,0.156 10 false *2 3.115,0.781 3.427,0.938 0.313,0.156 10 false *3 0.865,2.25 1.177,2.406 0.313,0.156 10 false *4 0.521,2.469 0.833,2.625 0.313,0.156 10 false *5 1.865,2.719 2.177,2.875 0.313,0.156 10 false *1 2.813,1.969 3.125,2.125 0.313,0.156 10 false *2 3.167,1.75 3.365,1.948 0.198,0.198 10 false *3 1.198,2.948 1.51,3.104 0.313,0.156 10 false *4 0.906,3.177 1.219,3.333 0.313,0.156 10 false *5
*1 Quarter Window Hinge LH
*2 Bush
*3 Quarter Window hinge Retainer
*4 Washer
*5 Screw


Clean the threads of the 2 quarter window hinge retainers with non-residue solvent.


b.

Install the 2 new quarter window hinge LH, 2 quarter window hinge retainers, 2 bushes and 2 washers with the 2 new screws.

Torque:
2.5 N*m (25 kgf*cm, 22 in.*lbf)


Hide 62920 4.INSTALL QUARTER WINDOW LOCK ASSEMBLY LH

a.
B415211C01
0.125,0.792 0.125,1.052 true 0.438,0.906 0.438,1.146 true 0.99,1.667 0.99,1.917 true 0.073,1.094 0.385,1.25 0.313,0.156 10 false *1 0.448,1.177 0.771,1.323 0.323,0.146 10 false *2 0.917,1.927 1.229,2.083 0.313,0.156 10 false *3
*1 Quarter Window Hinge Retainer LH
*2 Bush
*3 Screw


Clean the threads of the 2 quarter window hinge retainer hinge LH with non-residue solvent.


b.

Install the quarter window lock assembly LH, quarter window hinge retainer LH and bush with the new screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 62786D 5.INSTALL NO. 2 QUARTER WINDOW GLASS SPACER

a.

Apply Primer G to the No. 2 quarter window glass spacer installation area on the quarter window glass LH.

NOTICE:

Do not apply too much Primer G.



b.

When removing the peeling paper of a new No. 2 quarter window glass spacer LH, make sure that it does not contact the adhesive surface.

NOTICE:

Install the front quarter window weather strip LH after Primer G has been allowed to dry (approximately 3 min).



c.

Install the No. 2 quarter window glass spacer LH to the quarter window glass LH in the location shown in the illustration.

B416245C01
5.781,1.198 6.021,1 false 0.063,0.063 0.375,0.219 0.313,0.156 10 false *a 1.938,0.958 2.094,1.115 0.156,0.156 10 true b 6.083,0.896 6.333,1.073 0.25,0.177 10 true *b 1.083,1.406 1.24,1.604 0.156,0.198 10 true b 3.677,0.531 3.833,0.729 0.156,0.198 10 false a
*a Back of Quarter Window Glass LH *b R end
V100155

No. 2 Quarter Window Glass Spacer LH - -


Standard:
Area Measurement
a 373.2 mm (14.693 in.)
b 5.0 mm (0.197 in.)



Hide 68114 6.INSTALL QUARTER WINDOW GLASS LH

a.
B416247C01
2.865,0.458 3.177,0.615 0.313,0.156 10 true *a 0.083,1.24 0.302,1.385 0.219,0.146 10 true *b 2.927,1.604 3.24,1.802 0.313,0.198 10 true *a 0.25,1.844 0.458,2.042 0.208,0.198 10 true *b
*a Nut
*b Bolt


Temporarily install the 2 nuts, 2 bolts and the quarter window glass LH.

NOTICE:

Install the quarter window glass LH with the quarter window lock released.



b.

Tighten the 2 nuts and 2 bolts in the order shown in the illustration.

Torque:
for Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
for Bolt : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 68113 7.CHECK FOR LEAKS

Hide 67674A 8.INSTALL REAR DOOR FRAME GARNISH LH

Hide 73220 9.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (for Shoulder Anchor)

a.
B415705

Install the bolt and connect the shoulder anchor of the front seat outer belt assembly LH.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Check that the ELR locks.

NOTICE:

The check should be performed with the front seat outer belt assembly LH installed.


i.

With the belt assembly installed, check that the belt locks when it is pulled out quickly.



Hide 73178A 10.INSTALL SEAT BELT ANCHOR COVER CAP

Hide 67604 11.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 73233 12.INSTALL LAP BELT OUTER ANCHOR COVER