Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY
RM3250E _52 Drivetrain _038039 AXLE AND DIFFERENTIAL _0186175 REAR DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
C313282C03
2.573,0.583 2.906,0.583 false 2.948,0.479 3.26,0.677 0.313,0.198 10 false *a
*a Object Exceeding Weight Limit of Transmission Jack


Be sure to perform this procedure with several people as the rear differential carrier assembly is very heavy.

·

Be sure to follow the procedure described in the repair manual, or the transmission jack may suddenly drop or a part may fall.



HINT:

The following procedures are for BD20 (w/o Differential Lock).


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 37110F 2.REMOVE REAR PROPELLER SHAFT ASSEMBLY

Hide 4.REMOVE REAR AXLE SHAFT WITH BACKING PLATE LH

Hide 5.REMOVE REAR AXLE SHAFT WITH BACKING PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 41110 6.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

C236646

a.

Remove the 10 nuts, 10 washers and rear differential carrier assembly.

CAUTION:

The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.


NOTICE:
·

Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

·

The remaining oil may leak out when removing the rear differential carrier assembly.

·

Do not damage the installation surface when removing the rear differential carrier assembly.

·

Remove the bolts with the rear differential carrier assembly secured.




Hide 42181 7.REMOVE REAR DIFFERENTIAL CARRIER GASKET