Home › Vehicle Exterior › DOOR / HATCH › HOOD
RM3250E _59 Vehicle Exterior _038077 DOOR / HATCH _0186364 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 75777E 1.REMOVE FRONT HOOD MOULDING PAD

Hide 75770 2.REMOVE FRONT HOOD MOULDING ASSEMBLY

Hide 53381 3.REMOVE HOOD TO RADIATOR SUPPORT SEAL

a.
B404410

Using a clip remover, remove the 6 clips and hood to radiator support seal.


Hide 53341B 4.REMOVE HOOD INSULATOR

a.
B408999

w/ Hood Bulge:

i.

Using a clip remover, remove the 10 clips.


ii.

Detach the guide and remove the hood insulator.



b.
B404411

w/ Hood Insulator:

i.

Using a clip remover, remove the 12 clips.


ii.

Detach the guide and remove the hood insulator.



Hide 76186 5.REMOVE HOOD AIR INTAKE SEAL (w/ Hood Bulge)

a.
B409000

Detach the clip and remove the hood air intake seal.


Hide 76181 6.REMOVE HOOD BULGE (w/ Hood Bulge)

a.
B409001

Remove the 11 nuts.


b.

Detach the clip and remove the hood bulge.


Hide 76183 7.REMOVE NO. 1 HOOD BULGE PROTECTOR (w/ Hood Bulge)

a.
B408986

Remove the No. 1 hood bulge protector from the hood bulge.

NOTICE:

Remove any remaining double-sided tape from the hood bulge.



Hide 85035 8.REMOVE WASHER NOZZLE SUB-ASSEMBLY

Hide 9.DISCONNECT WASHER HOSE

a.
B404412

Detach the clamp and disconnect the washer hose.