Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL RECEIVER › 2015.06–2016.03
RM3250E _58 Vehicle Interior _038064 DOOR LOCK _0186386 DOOR CONTROL RECEIVER A

DOOR LOCK  DOOR CONTROL RECEIVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 89741 1.INSTALL DOOR CONTROL RECEIVER (w/o Entry and Start System)

a.
B408947C02
0,0 0,0 false
V100135

Nut
V100136

Connector


Connect the connector.


b.

Attach the guide to install the door control receiver with the nut.


Hide 89740A 2.INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Entry and Start System)

a.
B408948C02
0,0 0,0 false
V100135

Nut
V100136

Connector


Connect the connector.


b.

Attach the guide to install the smart door control receiver assembly with the nut.


Hide 55302A 3.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION