Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
8598A
1.INSTALL DOOR CONTROL BATTERY
|
Bolt |
|
Connector |
Connect the connector.
Attach the hook to install the door control battery with the 2 bolts.
55303B
2.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
55302A
3.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
5.CHECK SRS WARNING LIGHT (w/ Airbag System)
for Type A:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>DIAGNOSIS SYSTEM
for Type B:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>DIAGNOSIS SYSTEM