Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR › 2015.06–2016.03
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0187282 FRONT EVAPORATOR TEMPERATURE SENSOR A

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 88625 1.INSTALL NO. 1 COOLER THERMISTOR (FRONT EVAPORATOR TEMPERATURE SENSOR)

a.
E291060N04
0.302,0.708 0.458,0.906 0.156,0.198 10 false a 1.594,1.979 1.75,2.177 0.156,0.198 10 false b

Install the No. 1 cooler thermistor (front evaporator temperature sensor) as shown in the illustration.

NOTICE:
·

Be sure to insert the No. 1 cooler thermistor (front evaporator temperature sensor) only once because reinserting it into the same position will not allow it to be firmly secured.

·

When reusing the evaporator, insert the No. 1 cooler thermistor (front evaporator temperature sensor) one row next to the one that has been used previously.

·

After inserting the thermistor, do not apply excessive force to the wire.



Installation Position:
Position Measurement
a 45 to 55 mm (1.78 to 2.16 in.)
b 61.1 mm (2.41 in.) (9 Fins)



Hide 88501 2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

Hide 87107A 4.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY (for Automatic Air Conditioning System, Manual Air Conditioning System)

Hide 88650N 5.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

Hide 82210K 6.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)