Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)
RM3250E _59 Vehicle Exterior _038077 DOOR / HATCH _0188853 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362C11
1.719,1.323 2.458,1.323 false 1.542,1.229 1.729,1.396 0.188,0.167 10 false *1
*1 String


Tie the string that was passed through the engine compartment to the end of the hood lock control cable assembly as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Pass the hood lock control cable assembly through the vehicle body, and then attach the grommet and each clamp.


c.

Untie the string from the hood lock control cable assembly.

B404420C08
2.021,3.406 2.115,3.406 2.115,3.406 2.208,3.146 true 2.281,2.875 2.594,2.875 true 2.01,1.625 2.375,1.625 true 1.917,0.313 2.083,0.313 2.083,0.313 2.083,0.552 true 1.896,0.854 2.135,0.854 2.135,0.854 2.313,0.854 true 3.125,0.24 3.292,0.24 3.292,0.24 3.292,0.479 true 2.979,0.813 3.219,0.813 3.219,0.813 3.396,0.813 true 4.479,0.833 4.5,0.833 4.5,0.833 4.677,0.833 true 4.229,0.333 4.469,0.333 4.469,0.333 4.469,0.573 true 1.844,2.198 1.938,2.198 1.938,2.198 2.073,1.958 true 3.781,3.083 3.781,2.823 3.781,2.823 3.927,2.823 true 3.823,3.563 4.052,3.563 4.052,3.563 4.052,3.26 true 5.479,0.948 5.823,0.948 true 5.979,0.344 5.844,0.344 5.844,0.344 5.844,0.583 true 2.448,2.792 2.667,3 0.219,0.208 10 true *1 1.844,3.313 2.063,3.521 0.219,0.208 10 true *3 2.167,0.76 2.385,0.969 0.219,0.208 10 true *1 1.677,2.104 1.896,2.313 0.219,0.208 10 true *3 1.781,0.229 2,0.438 0.219,0.208 10 true *3 2.313,1.51 2.531,1.719 0.219,0.208 10 true *1 3,0.125 3.219,0.333 0.219,0.208 10 true *3 3.281,0.708 3.5,0.917 0.219,0.208 10 true *1 4.594,0.75 4.813,0.958 0.219,0.208 10 true *1 4.115,0.229 4.333,0.438 0.219,0.208 10 true *2 3.938,2.729 4.156,2.938 0.219,0.208 10 true *3 3.708,3.448 3.927,3.656 0.219,0.208 10 true *1 5.781,0.833 6,1.042 0.219,0.208 10 true *1 5.969,0.25 6.188,0.458 0.219,0.208 10 true *3
*1 Hood Lock Control Cable Assembly *2 Grommet
*3 Clamp - -



Hide 53601 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B393838

Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.


b.
B404417

Attach the claw to install the hood lock control lever sub-assembly.


Hide 53510 3.INSTALL HOOD LOCK ASSEMBLY

a.
B405473

Apply MP grease to the sliding parts of the hood lock assembly.


b.

Connect the hood lock control cable assembly to the hood lock assembly.


c.
B412053

Install the hood lock assembly with the 3 bolts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 53117C 4.INSTALL NO. 1 RADIATOR GRILLE RETAINER