Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
83950M
1.INSTALL TELLTALE LIGHT ASSEMBLY
Attach the 2 claws to install the telltale light assembly.
55420A
2.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55908A
3.CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
55906A
4.CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
84013A
5.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
55900
6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55041B
7.INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY
55470
8.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
55410C
9.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
11.PERFORM DIAGNOSTIC SYSTEM CHECK
12.CHECK SRS WARNING LIGHT
for Type A:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>DIAGNOSIS SYSTEM
for Type B:
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>DIAGNOSIS SYSTEM