Home › Steering › STEERING COLUMN › STEERING WHEEL › 2015.06–2016.03
RM3250E _55 Steering _038050 STEERING COLUMN _0190437 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
B403904

Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing.

for Type A: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type A)>PRECAUTION

for Type B: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION


PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 45186 3.REMOVE NO. 2 LOWER STEERING WHEEL COVER (w/o Airbag System)

a.
C333687C01
0.531,0.385 0.74,0.542 true 0.365,0.24 0.677,0.438 0.313,0.198 10 false *a
*a Cutout
V100155

Protective Tape


Using a screwdriver, insert the screwdriver into the cutout of the lower No. 2 steering wheel cover and detach the claw and guide to remove the lower No. 2 steering wheel cover.

HINT:

Tape the screwdriver tip before use.



Hide 45130 4.REMOVE HORN BUTTON ASSEMBLY (w/o Airbag System)

a.
C333682C01
0.469,1.771 0.74,2.073 true 0.781,2.042 1,2.24 0.219,0.198 10 true *1
*1 Spring
V113147

Insert a screwdriver
V113148

Push in the spring


Push in the spring to detach the pin of the horn button assembly.

HINT:

Use a "TORX" screwdriver or similar tool to push the spring.



b.
C333697C01
0.448,0.865 0.688,1.01 true 2.781,0.99 3.042,0.906 true 0.26,0.771 0.479,0.958 0.219,0.188 10 true *1 3.052,0.813 3.292,0.99 0.24,0.177 10 true *1
*1 Spring
V113147

Insert a screwdriver
V113148

Push in the spring


Push in the 2 springs to detach the pin of the horn button assembly.

HINT:

Use a "TORX" screwdriver or similar tool to push the spring.



c.

Disconnect the horn wire, and remove the horn button.


Hide 45130 5.REMOVE STEERING WHEEL PAD ASSEMBLY (w/ Airbag System)

Hide 45116 6.REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

a.
C322168

Remove the 2 screws.


b.

Detach the 6 guide pins and 2 claws to remove the No. 1 steering wheel ornament.


Hide 84250A 7.REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

Hide 84632 8.REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

Hide 45100 9.REMOVE STEERING WHEEL ASSEMBLY

a.

Remove the steering wheel set nut.


b.
C327832C01
0.604,1.156 0.406,0.583 0.406,0.583 0.656,0.99 true 2.25,0.938 2.5,0.25 2.5,0.25 2.667,0.25 true 0.281,0.417 0.594,0.573 0.313,0.156 10 false *a 1.531,1.896 1.844,2.052 0.313,0.156 10 false *b 3.021,0.865 3.333,1.021 0.313,0.156 10 false *c 2.729,0.177 3.188,0.375 0.458,0.198 10 false SST
*a Matchmark
*b Hold
*c Turn


Put matchmarks on the steering wheel and steering main shaft.


c.

Using SST, remove the steering wheel assembly.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05021)

NOTICE:

Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.



Hide 45184 10.REMOVE LOWER STEERING WHEEL BOSS COVER

a.
C333688

w/o Airbag System:

i.

Detach the 2 guide pins and 4 claws to remove the lower steering wheel boss cover.



b.
C327776

w/ Airbag System:

i.

Detach the 2 guide pins and 4 claws to remove the lower steering wheel boss cover.