Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1GR-FE)
RM3250E _55 Steering _038049 POWER ASSIST SYSTEMS _0190449 VANE PUMP(for 1GR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1GR-FE)  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

Hide 53736 2.REMOVE FRONT FENDER APRON SEAL RH

a.

Detach the 6 clips and remove the front fender apron seal RH.


Hide 44348A 3.DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE

a.
C333684

Slide the clip and disconnect the No. 1 oil reservoir to pump hose.


b.

Drain the power steerig fluid.


Hide 44410 4.DISCONNECT PRESSURE FEED TUBE ASSEMBLY

a.

for 2WD:

i.
C333685

Remove the union bolt, then disconnect the pressure feed tube assembly.


ii.

Remove the gasket from the pressure feed tube assembly.



b.

for 4WD:

i.

Disconnect the power steering oil pressure switch connector.


ii.
C333686

Remove the union bolt, then disconnect the pressure feed tube assembly.


iii.

Remove the gasket from the pressure feed tube assembly.



Hide 44320 5.REMOVE VANE PUMP ASSEMBLY

a.

for 2WD:

Disconnect the power steering oil pressure switch connector.


b.
C283127

Remove the 2 bolts and vane pump assembly.