Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR SEAT CUSHION ASSEMBLY
64271C
2.REMOVE BACK PANEL TRIM
73370C
3.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH (for Floor Anchor)
Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.
62514A
4.REMOVE LOWER QUARTER TRIM PANEL LH
73178C
5.REMOVE SEAT BELT ANCHOR COVER CAP
73370C
6.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and disconnect the shoulder anchor of the rear No. 1 seat outer belt assembly LH.
Remove the bolt.
Detach the 2 guides and remove the rear No. 1 seat outer belt assembly LH.