Home › Engine / Hybrid System › 2GD-FTV INTAKE / EXHAUST › INTERCOOLER
RM3250E _51 Engine / Hybrid System _038009 2GD-FTV INTAKE / EXHAUST _0191567 INTERCOOLER A

2GD-FTV INTAKE / EXHAUST  INTERCOOLER  REMOVAL  


PROCEDURE

Hide 17361J 5.REMOVE NO. 1 AIR TUBE

a.
A345110

Remove the 2 bolts from the No. 1 air tube.


b.

Loosen the hose clamp and remove the No. 1 air tube from the intercooler assembly.


c.

Loosen the hose clamp and remove the No. 2 air hose from the No. 1 air tube.


Hide 17344E 6.REMOVE NO. 4 AIR HOSE

Hide 17362B 7.REMOVE NO. 2 AIR TUBE

a.
A345108

Detach the 4 clamps and disconnect the oil return hose.


b.
A345109

Remove the 2 bolts from the No. 2 air tube.


c.

Loosen the hose clamp and remove the No. 2 air tube from the intercooler assembly.


Hide 53208A 8.DISCONNECT HOOD LOCK SUPPORT SUB-ASSEMBLY

a.
A345111

Disconnect the 3 connectors from the high pitched horn assembly, low pitched horn assembly and hood lock assembly.


b.

Detach the 5 wire harness clamps and disconnect the wire harness.


c.
A345112

Remove the 3 bolts and disconnect the hood lock support sub-assembly.

HINT:

Do not bend the hood lock cable.



Hide 17940D 9.REMOVE INTERCOOLER ASSEMBLY

a.
A345113

Remove the 2 bolts.


b.

Detach the 2 guides and remove the intercooler assembly from the lower radiator support assembly.

HINT:

Tilt the intercooler assembly and lift up to remove it.



Hide 10.REMOVE GROMMET

a.

Remove the 2 grommets from the lower radiator support assembly.