53117C
1.REMOVE NO. 1 RADIATOR GRILLE RETAINER
52119A
2.REMOVE FRONT BUMPER COVER
| *A | for Standard Body |
| *B | for Wide Body |
Remove the clip.
Put protective tape around the front bumper cover.
| *A | for Standard Body | *B | for Wide Body |
|
Protective Tape | - | - |
| *a | Bolt |
| *b | Screw |
Remove the 2 screws and 2 bolts.
Remove the 3 screws.
|
Place Hands Here |
|
Remove in this Direction |
for Standard Body:
Detach the claw as shown in the illustration.
Use the same procedure for the claw on the other side.
|
Place Hands Here |
|
Remove in this Direction |
for Wide Body:
Detach the claw as shown in the illustration.
Use the same procedure for the claw on the other side.
| *A | for Standard Body |
| *B | for Wide Body |
|
Remove in this Direction |
Remove the front bumper cover as shown in the illustration.
| *A | for Standard Body |
| *B | for Wide Body |
|
Protective Tape |
Remove the protective tape.
53892G
3.REMOVE FRONT FENDER SPLASH SHIELD FRONT SEAL LH
53891J
4.REMOVE FRONT FENDER SPLASH SHIELD FRONT SEAL RH
Use the same procedure described for the LH side.
5.REMOVE FRONT BUMPER ASSEMBLY
| *A | for Standard Body |
| *B | for Wide Body |
Remove the 4 bolts.
| *A | for Standard Body |
| *B | for Wide Body |
Remove the 8 bolts.
w/ Fog Light:
Disconnect the connector.
| *A | for Standard Body |
| *B | for Wide Body |
|
Remove in this Direction |
Detach the guide and remove the front bumper assembly as shown in the illustration.
52103
6.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH
Put matchmark on the front bumper bracket sub-assembly LH and vehicle body.
| *a | matchmark |
Remove the 4 bolts and front bumper bracket sub-assembly LH.
52102
7.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
52140
8.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY LH
Remove the 2 bolts and front bumper side mounting bracket assembly LH.
52130
9.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY RH
Use the same procedure described for the LH side.
52021
10.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
|
Remove in this Direction |
Remove the 4 bolts.
Detach the guide and remove the front bumper reinforcement sub-assembly as shown in the illustration.
52124B
11.REMOVE FRONT BUMPER REINFORCEMENT PLATE LH
|
Remove in this Direction |
Remove the bolt.
Detach the guide and remove the front bumper reinforcement plate LH as shown in the illustration.
52123B
12.REMOVE FRONT BUMPER REINFORCEMENT PLATE RH
Use the same procedure described for the LH side.
52116A
13.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Standard)
| *a | 90° |
|
Rotation Direction |
|
Remove in this Direction |
Remove the bolt and clip.
Using a screwdriver, turn the clip 90° and remove the clip.
Detach the claw and remove the front bumper side support LH as shown in the illustration.
52115A
14.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Standard)
Use the same procedure described for the LH side.
52116A
15.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Wide Body)
| *a | 90° |
|
Rotation Direction |
|
Remove in this Direction |
Remove the bolt and clip.
Using a screwdriver, turn the clip 90° and remove the 2 clips.
Detach the claw and remove the front bumper side support LH as shown in the illustration.
52115A
16.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Wide Body)
Use the same procedure described for the LH side.
53294C
17.REMOVE RADIATOR SIDE DEFLECTOR LH
|
Remove in this Direction |
w/ Intercooler:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
|
Remove in this Direction |
w/o Intercooler:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
53293C
18.REMOVE RADIATOR SIDE DEFLECTOR RH
Use the same procedure described for the LH side.