Home › Engine / Hybrid System › 1TR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM3250E _51 Engine / Hybrid System _037998 1TR-FE ENGINE MECHANICAL _0193491 FRONT CRANKSHAFT OIL SEAL A

1TR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11303A 1.INSTALL TIMING CHAIN CASE OIL SEAL

a.
A349289N01
2,2.917 1.833,2.917 1.833,2.917 1.583,2.458 true 1.281,2.552 1.833,2.917 true 2.281,0.74 1.833,0.333 1.833,0.333 1.667,0.333 false 1.833,0.333 1.958,1.063 false 2.042,2.833 2.5,3.031 0.458,0.198 10 false SST 1.333,0.25 1.792,0.448 0.458,0.198 10 false SST

Apply MP grease to the lip of a new timing chain case oil seal.

NOTICE:
·

Do not allow foreign matter to contact the lip of the timing chain case oil seal.

·

Do not allow MP grease to contact the dust seal.




b.

Temporarily install the timing chain case oil seal to the timing chain cover sub-assembly.


c.

Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.

SST
09223-75010  
09950-70010  (09951-07100)

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap the timing chain case oil seal at an angle.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY