55302A
1.REMOVE INSTRUMENT UPPER PANEL SUB-ASSEMBLY
2.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
w/o Turnover:
Disconnect the clutch pedal spring from the clevis pin and clutch pedal support and remove it.
Remove the clip and clevis pin and disconnect the clutch master cylinder push rod clevis.
3.REMOVE CLUTCH PEDAL SUPPORT ASSEMBLY
Disconnect the clutch switch connector.
Remove the bolt, 2 nuts and clutch pedal support assembly.
31321
4.REMOVE CLUTCH PEDAL PAD
88280A
5.REMOVE CLUTCH SWITCH ASSEMBLY (w/ Clutch Switch Assembly)
84520
6.REMOVE CLUTCH START SWITCH ASSEMBLY
7.REMOVE CLUTCH PEDAL SPRING (w/ Turn Over)
Move the pedal to the full stroke position and remove the clutch pedal spring.
|
Remove in this Direction |
Remove the pedal spring with hook.
31301
8.REMOVE CLUTCH PEDAL SUB-ASSEMBLY
Remove the nut, bolt and clutch pedal sub-assembly from the clutch pedal support sub-assembly.
31353
9.REMOVE CLUTCH PEDAL SPRING HOLDER (w/ Turn Over)
Remove the clutch pedal spring holder from the clutch pedal support sub-assembly.
31301P
10.REMOVE CLUTCH PEDAL TURNOVER BUSH (w/ Turn Over)
Remove the clutch pedal turnover bush from the clutch pedal sub-assembly.
31301C
11.REMOVE CLUTCH PEDAL BUSH
Remove the collar and 2 clutch pedal bushes from the clutch pedal sub-assembly.
31301B
12.REMOVE NO. 1 CLUTCH PEDAL CUSHION
Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.
31453B
13.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
Using SST and a hammer, tap out the clutch master cylinder push rod clevis bush from the clutch pedal sub-assembly.
31395
14.REMOVE PEDAL SPRING HOOK (w/ Turn Over)
Remove the pedal spring hook from the clutch pedal support sub-assembly.
31301S
15.REMOVE NO. 2 CLUTCH PEDAL CUSHION
Remove the No. 2 clutch pedal cushion from the clutch pedal sub-assembly.
Remove the No. 2 clutch pedal cushion from the clutch pedal sub-assembly.