Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL › from 2016.01
RM3250E _51 Engine / Hybrid System _049911 5L-E ENGINE MECHANICAL _0245947 REAR CRANKSHAFT OIL SEAL A

5L-E ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 31210 2.REMOVE CLUTCH COVER ASSEMBLY

Hide 31250 3.REMOVE CLUTCH DISC ASSEMBLY

Hide 13405 4.REMOVE FLYWHEEL SUB-ASSEMBLY

Hide 11354 6.REMOVE FLYWHEEL HOUSING DUST SEAL

Hide 11381A 7.REMOVE REAR CRANKSHAFT OIL SEAL

a.
A057267C01
0.375,1.292 0.552,0.531 0.552,0.531 0.698,0.531 true 0.729,0.406 0.906,0.594 0.177,0.188 10 false *a
*a Cut Position


Using a knife, cut off the lip of the rear engine oil seal.


b.

Using a screwdriver, pry out the rear engine oil seal from the rear engine oil seal retainer.

NOTICE:

Be careful not to damage the crankshaft and rear engine oil seal retainer.


HINT:
·

After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.

·

Tape the screwdriver tip before use.