Home › Engine / Hybrid System › 1TR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2016.01
RM3250E _51 Engine / Hybrid System _037997 1TR-FE ENGINE CONTROL _0181528 CRANKSHAFT POSITION SENSOR A

1TR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CRANKSHAFT POSITION SENSOR

a.
A301635C01
1.49,1.365 1.417,1.677 1.417,1.677 1.208,1.677 false 1.01,1.573 1.323,1.729 0.313,0.156 10 false *1
*1 O-Ring


Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:
·

When reusing the crankshaft position sensor, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed when installing the crankshaft position sensor.




c.

Connect the crankshaft position sensor connector to the connector bracket.


d.

Attach the harness clamp.


e.

Connect the crankshaft position sensor connector.


Hide 88431 2.INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

Hide 88320 3.CONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)

a.
E316308

Using an E8 "TORX" socket wrench, temporarily connect the cooler compressor assembly with the 2 stud bolts.


b.

Tighten the 2 stud bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A345923N01
2.135,0.115 2.292,0.313 0.156,0.198 10 true 1 2.583,1.188 2.74,1.385 0.156,0.198 10 true 2 0.885,0.771 1.042,0.969 0.156,0.198 10 true 3 2.25,1.885 2.406,2.083 0.156,0.198 10 true 4

Tighten the 2 nuts and 2 bolts in the order shown in the illustration to connect the cooler compressor assembly.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


d.

Connect the cooler compressor connector.


e.

Connect the suction hose sub-assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 53735B 4.INSTALL FRONT UPPER FENDER APRON SEAL LH (w/ Air Conditioning System)

Hide 16361A 5.INSTALL FAN AND GENERATOR V BELT (w/ Air Conditioning System)

Hide 51410 6.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (w/ Air Conditioning System)