Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Steel Type Bumper) › from 2016.03
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0184372 FRONT BUMPER(for Steel Type Bumper) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Steel Type Bumper)  REMOVAL  


PROCEDURE

Hide 53117C 1.REMOVE NO. 1 RADIATOR GRILLE RETAINER

Hide 52119A 2.REMOVE FRONT BUMPER COVER

a.
B412687C03
0.094,0.063 0.406,0.26 0.313,0.198 12 false *A 0.115,2.521 0.427,2.719 0.313,0.198 12 false *B
*A for Standard Body
*B for Wide Body


Remove the clip.


b.

Put protective tape around the front bumper cover.

B412688C02
0.094,0.063 0.406,0.26 0.313,0.198 12 false *A 3.844,0.073 4.156,0.271 0.313,0.198 12 false *B
*A for Standard Body *B for Wide Body
V100155

Protective Tape - -



c.
B412689C01
0.646,0.479 0.896,0.479 true 1.406,0.323 1.656,0.323 true 2.146,0.323 2.396,0.323 true 2.906,0.479 3.073,0.479 true 1.667,0.219 1.917,0.417 0.25,0.198 10 true *a 2.406,0.219 2.656,0.417 0.25,0.198 10 true *a 3.073,0.375 3.333,0.594 0.26,0.219 10 true *b 0.906,0.375 1.167,0.594 0.26,0.219 10 true *b
*a Bolt
*b Screw


Remove the 2 screws and 2 bolts.


d.
B412690

Remove the 3 screws.


e.
B412711C01
2.875,4.063 2.604,3.948 false
V113146

Place Hands Here
V113147

Remove in this Direction


for Standard Body:

i.

Detach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




f.
B412691C01
2.813,4.094 2.615,3.99 false
V113146

Place Hands Here
V113147

Remove in this Direction


for Wide Body:

i.

Detach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




g.

w/ Pre-crash Safety System:

i.

Disconnect the connector.



h.
B412725C02
0.115,2.521 0.427,2.719 0.313,0.198 12 false *B 0.094,0.083 0.406,0.281 0.313,0.198 12 false *A
*A for Standard Body
*B for Wide Body
V113147

Remove in this Direction


Remove the front bumper cover as shown in the illustration.


i.
B414789C03
0.073,0.052 0.385,0.25 0.313,0.198 12 false *A 0.083,2.552 0.396,2.75 0.313,0.198 12 false *B
*A for Standard Body
*B for Wide Body
V100155

Protective Tape


Remove the protective tape.


Hide 53892G 3.REMOVE FRONT FENDER SPLASH SHIELD FRONT SEAL LH

Hide 53891J 4.REMOVE FRONT FENDER SPLASH SHIELD FRONT SEAL RH

HINT:

Use the same procedure described for the LH side.


Hide 5.REMOVE FRONT BUMPER ASSEMBLY

a.
B412776C02
0.094,0.063 0.406,0.26 0.313,0.198 12 false *A 0.125,2.552 0.438,2.75 0.313,0.198 12 false *B
*A for Standard Body
*B for Wide Body


Remove the 4 bolts.


b.
B414790C02
0.052,0.042 0.365,0.24 0.313,0.198 12 false *A 0.063,2.5 0.375,2.698 0.313,0.198 12 false *B
*A for Standard Body
*B for Wide Body


Remove the 8 bolts.


c.

w/ Fog Light:

i.

Disconnect the connector.



d.
B414791C02
0.073,0.063 0.385,0.26 0.313,0.198 12 false *A 0.104,2.583 0.417,2.781 0.313,0.198 12 false *B
*A for Standard Body
*B for Wide Body
V113147

Remove in this Direction


Detach the guide and remove the front bumper assembly as shown in the illustration.


Hide 52103 6.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH

a.

Put matchmark on the front bumper bracket sub-assembly LH and vehicle body.


b.
B412701C01
1,1.74 1.25,1.74 1.25,1.74 1.25,1.406 true 0.75,1.667 1,1.865 0.25,0.198 10 true *a
*a matchmark


Remove the 4 bolts and front bumper bracket sub-assembly LH.


Hide 52102 7.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52140 8.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY LH

a.
B412702

Remove the 2 bolts and front bumper side mounting bracket assembly LH.


Hide 52130 9.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52021 10.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B412703C01
0.99,1.51 1.24,1.531 false
V113147

Remove in this Direction


Remove the 4 bolts.


b.

Detach the guide and remove the front bumper reinforcement sub-assembly as shown in the illustration.


Hide 52124B 11.REMOVE FRONT BUMPER REINFORCEMENT PLATE LH

a.
B412704C01
2.125,1.844 1.958,1.75 false
V113147

Remove in this Direction


Remove the bolt.


b.

Detach the guide and remove the front bumper reinforcement plate LH as shown in the illustration.


Hide 52123B 12.REMOVE FRONT BUMPER REINFORCEMENT PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 52116A 13.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Standard)

a.
B412705C01
2.375,0.979 2.656,1.177 0.281,0.198 10 true *a
*a 90°
V113147

Rotation Direction
V113148

Remove in this Direction


Remove the bolt and clip.


b.

Using a screwdriver, turn the clip 90° and remove the clip.


c.

Detach the claw and remove the front bumper side support LH as shown in the illustration.


Hide 52115A 14.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Standard)

HINT:

Use the same procedure described for the LH side.


Hide 52116A 15.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Wide Body)

a.
B412706C01
2.354,0.969 2.604,1.146 0.25,0.177 10 true *a
*a 90°
V113147

Rotation Direction
V113148

Remove in this Direction


Remove the bolt and clip.


b.

Using a screwdriver, turn the clip 90° and remove the 2 clips.


c.

Detach the claw and remove the front bumper side support LH as shown in the illustration.


Hide 52115A 16.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Wide Body)

HINT:

Use the same procedure described for the LH side.


Hide 53294C 17.REMOVE RADIATOR SIDE DEFLECTOR LH

a.
B412707C01
0,0 0,0 false
V113147

Remove in this Direction


w/ Intercooler:

i.

Detach the claw and remove the radiator side deflector LH as shown in the illustration.



b.
B412708C01
1.01,3.771 1.198,3.677 false
V113147

Remove in this Direction


w/o Intercooler:

i.

Detach the claw and remove the radiator side deflector LH as shown in the illustration.



Hide 53293C 18.REMOVE RADIATOR SIDE DEFLECTOR RH

HINT:

Use the same procedure described for the LH side.