Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › from 2016.03
RM3250E _51 Engine / Hybrid System _037980 CRUISE CONTROL _0262564 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.


PROCEDURE

Hide 88211B 1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

a.

Attach the 2 guides to install the millimeter wave radar sensor assembly.


b.
B443382C02
2.823,2.25 2.979,2.448 0.156,0.198 10 false 1 0.542,2.25 0.698,2.448 0.156,0.198 10 false 2 2.146,1.177 2.302,1.375 0.156,0.198 10 true 3
V100135

Bolt
V100136

Screw


Install the screw and 2 bolts.

HINT:

Tighten the bolts and screws in the order shown in the illustration.



Hide 53117C 2.INSTALL NO. 1 RADIATOR GRILLE RETAINER

Hide 88211B 3.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY

a.

If the millimeter wave radar sensor has been replaced, the front of the vehicle has been repaired or modified, or the position of the beam axis change mechanism has been changed, perform adjustment.

Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT