25681
1.INSTALL NO. 1 EGR COOLER
Install a new gasket and the No. 1 EGR cooler to the No. 2 EGR valve assembly with electric EGR control valve assembly with the 4 bolts.
2.INSTALL NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY
Temporarily install the No. 1 EGR cooler and No. 2 EGR valve assembly with electric EGR control valve assembly to the intake manifold with the 4 bolts.
Tighten the 4 bolts in the order shown in the illustration.
Make sure to tighten the bolts in the order.
25804
3.INSTALL VACUUM CONTROL VALVE SET
25601
4.INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY (w/o DPF)
5.INSTALL EGR PIPE WITH COOLER SUB-ASSEMBLY (w/ DPF)
16209
6.CONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY
16206B
7.INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY
Install the No. 3 water by-pass pipe sub-assembly to the No. 1 EGR cooler with the 2 bolts.
Connect the No. 9 water by-pass hose to the electric EGR control valve assembly, and slide the clamp to secure the hose.
Connect the No. 8 water by-pass hose to the No. 3 water by-pass pipe sub-assembly, and slide the clamp to secure the hose.
Connect the No. 4 fuel hose to the No. 3 water by-pass pipe sub-assembly.
25612
8.INSTALL NO. 2 EGR PIPE
25625
9.INSTALL EGR VALVE BRACKET
82121
10.CONNECT ENGINE WIRE
77826A
11.INSTALL NO. 1 UREA TANK FILLER PIPE SUPPORT (w/ Urea SCR System)
77910
12.CONNECT UREA TANK FILLER PIPE ASSEMBLY (w/ Urea SCR System)
23300
13.CONNECT FUEL FILTER ASSEMBLY
12632
14.INSTALL NO. 2 ENGINE COVER BRACKET
44763C
15.INSTALL NO. 2 HOSE TO HOSE TUBE
89421C
16.INSTALL TURBO PRESSURE SENSOR
23265C
17.INSTALL GAS FILTER
16278
18.INSTALL NO. 2 WATER BY-PASS PIPE
26100G
19.INSTALL DIESEL THROTTLE BODY ASSEMBLY
20.ADD ENGINE COOLANT
21.INSPECT FOR COOLANT LEAK