Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › UREA PUMP CONTROL ECU › from 2016.03
RM3250E _51 Engine / Hybrid System _038008 2GD-FTV EMISSION CONTROL _0262568 UREA PUMP CONTROL ECU A

2GD-FTV EMISSION CONTROL  UREA PUMP CONTROL ECU  REMOVAL  


PROCEDURE

Hide 77801A 1.REMOVE UREA TANK SUB-ASSEMBLY

Hide 89678A 2.REMOVE NO. 2 UREA PUMP CONTROL BRACKET

a.
A379865

Remove the 2 nuts and No. 2 urea pump control bracket from the No. 1 urea pump control bracket.


Hide 896B1 3.REMOVE UREA PUMP CONTROL ECU

a.
A379885

Raise the lever while pushing the lock on the lever and disconnect the connector from the urea pump control ECU.

NOTICE:

After disconnecting a connector, make sure that dirt, water and other foreign matter does not contact the connector.



b.
A379867

Remove the 3 nuts and No. 1 urea pump control bracket from the urea tank sub-assembly.


c.
A379868

Remove the 2 bolts and urea pump control ECU from the No. 1 urea pump control bracket.