Home › Engine / Hybrid System › 2GD-FTV STARTING › ENGINE SWITCH › from 2016.03
RM3250E _51 Engine / Hybrid System _038012 2GD-FTV STARTING _0193791 ENGINE SWITCH A

2GD-FTV STARTING  ENGINE SWITCH  REMOVAL  


PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY (for LHD)

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

Hide 55446A 3.REMOVE NO. 1 SWITCH HOLE BASE (for RHD)

Hide 89611 4.REMOVE ENGINE SWITCH

a.
A351905

Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.


b.

Disconnect the engine switch connector and remove the engine switch.