Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › from 2016.03
RM3250E _58 Vehicle Interior _038068 METER / GAUGE / DISPLAY _0189521 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.
E323371

Connect the connector and attach the clamp.


b.

Install the combination meter assembly with the 4 screws.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 45100 3.INSTALL STEERING WHEEL ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION