Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM33J0E _54 Brake _038481 PARKING BRAKE _0178303 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 46201E 1.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.
C323608

Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.


b.
C323607

Temporarily install the adjusting nut to the No. 1 parking brake cable assembly.


c.
C321817E02
2.063,1.573 2.219,1.771 0.156,0.198 10 true 1 2.406,0.479 2.563,0.677 0.156,0.198 10 true 2

Install the 2 bolts and 2 nuts in the order shown in the illustration.

Torque:
14.5 N*m (148 kgf*cm, 11 ft.*lbf)


d.
C321819C01
0.802,2.583 0.417,2.583 0.417,2.583 0.417,2.75 true 0.333,2.75 0.5,2.917 0.167,0.167 10 true *a
*a Claw
V113147

Return


Return the claw to its original position.

HINT:

Move the parking brake lever sub-assembly a few times and check for smooth movement.



e.
C323612E01
2.167,0.25 2.333,0.417 0.167,0.167 10 true 1 2.333,1.667 2.5,1.833 0.167,0.167 10 true 2 0.833,0.833 1,1 0.167,0.167 10 true 3

Install the 3 bolts in the order shown in the illustration.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


f.

Install the lock nut.

HINT:

Completely tighten the lock nut when adjusting the parking brake lever travel.



Hide 84550 2.INSTALL PARKING BRAKE SWITCH ASSEMBLY

Hide 3.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 58901A 4.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Console Box Lid)

Hide 58810J 5.INSTALL CONSOLE BOX ASSEMBLY (w/ Console Box Lid)