Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › AIR PUMP(w/ Secondary Air Injection System)
RM33J0E _51 Engine / Hybrid System _038457 2TR-FE EMISSION CONTROL _0189935 AIR PUMP(w/ Secondary Air Injection System) A

2TR-FE EMISSION CONTROL  AIR PUMP(w/ Secondary Air Injection System)  REMOVAL  


PROCEDURE

Hide 53736 1.REMOVE FRONT UPPER FENDER APRON SEAL RH

Hide 53875A 2.DISCONNECT FRONT FENDER LINER RH

a.

Remove the 6 clips and 3 screws and disconnect the front fender liner RH from the front bumper cover and body panel.

HINT:

It is not necessary to fully remove the front fender liner RH. Partially remove it so that the air pump assembly with bracket can be removed.



Hide 17705 3.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

Hide 17801 4.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17701 5.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 17621A 6.REMOVE AIR PUMP INLET

a.
A348644

Remove the bolt and disconnect the air pump inlet.


b.

Remove the No. 1 air injection system hose from the air pump inlet pipe.


c.

Remove the air pump inlet from the No. 1 air injection system hose.


Hide 17344 7.REMOVE NO. 4 AIR INJECTION SYSTEM HOSE

a.
A346749

Remove the hose clamp from the No. 4 air injection system hose and radiator hose inlet.


b.
A346750

Slide the 2 clips and disconnect the No. 4 air injection system hose from the air switching valve assembly and air pump inlet pipe.


Hide 17314C 8.REMOVE AIR PUMP ASSEMBLY WITH BRACKET

a.
A348645

Disconnect the air pump connector.


b.

Detach the clamp and disconnect the wire harness.


c.
A348646

Disconnect the No. 2 air injection system hose from the air pump inlet pipe.


d.

Slide the clip and disconnect the No. 3 air injection system hose from the air pump inlet pipe.


e.
A348647

Remove the 3 bolts and air pump assembly with bracket.


Hide 17611A 9.REMOVE AIR PUMP INLET PIPE

a.
A348648

Remove the 2 bolts and air pump inlet pipe from the body panel.


Hide 17610C 10.REMOVE AIR PUMP ASSEMBLY

a.
A348650C01
1.927,1.833 2.177,1.99 2.177,1.99 2.365,1.99 true 1.917,0.906 2.354,1.302 2.354,1.302 2.542,1.302 true 2.26,0.729 2.594,0.729 true 2.635,0.635 2.833,0.833 0.198,0.198 10 false *1 2.396,1.896 2.583,2.073 0.188,0.177 10 false *2 2.583,1.219 2.802,1.406 0.219,0.188 10 false *3
*1 No. 2 Air Injection System Hose
*2 No. 3 Air Injection System Hose
*3 Hose Clamp


Remove the hose clamp from the No. 3 air injection system hose and wire harness.


b.

Slide the clip and disconnect the No. 3 air injection system hose from the air pump assembly.


c.

Remove the No. 2 air injection system hose from the air pump assembly.


d.
A346755C01
0.667,0.146 1.188,0.146 1.188,0.146 1.521,0.406 true 2.177,0.375 2.656,0.375 true 0.469,0.063 0.656,0.25 0.188,0.188 10 false *1 2.708,0.313 2.896,0.5 0.188,0.188 10 false *2
*1 Air Pump Assembly
*2 Air Pump Bracket
V100135

Air Pump Insulator


Detach the 3 fittings of the air pump insulators and remove the air pump assembly from the air pump bracket.