Home › Engine / Hybrid System › 1GD-FTV COOLING › WATER PUMP
RM33J0E _51 Engine / Hybrid System _038425 1GD-FTV COOLING _0191902 WATER PUMP A

1GD-FTV COOLING  WATER PUMP  REMOVAL  


PROCEDURE

Hide 16321 1.REMOVE WATER INLET

Hide 16268 2.DISCONNECT NO. 1 WATER BY-PASS PIPE

a.
A341273

Detach the wire harness clamp and disconnect the 2 connectors from the turbocharger sub-assembly.


b.
A341233

Remove the 3 bolts and disconnect the No. 1 water by-pass pipe from the engine water pump assembly.


c.

Remove the gasket from the No. 1 water by-pass pipe.


Hide 16284 3.DISCONNECT NO. 1 TURBO WATER HOSE

a.
A341234

Slide the hose clamp and disconnect the No. 1 turbo water hose from the engine water pump assembly.


Hide 16100 4.REMOVE ENGINE WATER PUMP ASSEMBLY

a.
A341235

Remove the 8 bolts, engine water pump assembly and gasket.