16711
1.REMOVE FAN SHROUD
16207
2.DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY
Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the engine water pump assembly and water inlet.
16572D
3.DISCONNECT NO. 2 RADIATOR HOSE
Remove the bolt and disconnect the suction hose sub-assembly from the water inlet.
Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.
16321
4.REMOVE WATER INLET
Remove the 3 bolts and water inlet.
16331A
5.REMOVE THERMOSTAT
Remove the thermostat from the engine water pump assembly.
Remove the gasket from the thermostat.