Home › Engine / Hybrid System › 1GD-FTV COOLING › RADIATOR
RM33J0E _51 Engine / Hybrid System _038425 1GD-FTV COOLING _0191904 RADIATOR A

1GD-FTV COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 53294C 3.REMOVE RADIATOR SIDE DEFLECTOR

Hide 51410 4.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 16593 5.REMOVE NO. 1 RADIATOR AIR GUIDE

a.
A341277

Remove the 4 clips and No. 1 radiator air guide.

NOTICE:

Do not reuse the clip.



Hide 17344E 6.REMOVE NO. 4 AIR HOSE

a.
A341278

Detach the 2 clamps to disconnect the oil return hose from the No. 4 air hose.


b.

Loosen the 2 hose clamps and remove the No. 4 air hose.


Hide 17362B 7.REMOVE NO. 2 AIR TUBE

a.
A341279

Detach the 4 clamps to disconnect the oil return hose from the No. 2 air tube.


b.

Loosen the hose clamp and remove the 2 bolts and No. 2 air tube.


Hide 16571C 8.REMOVE NO. 1 RADIATOR HOSE

a.
A341280

Slide the 2 hose clamps and remove the No. 1 radiator hose.


Hide 44360 9.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

a.
A341281

Detach the clamp to disconnect the pressure feed tube assembly from the fan shroud.


b.

Detach the claw and disconnect the vane pump oil reservoir assembly from the No. 1 oil reservoir bracket as shown in the illustration.


Hide 44369A 10.REMOVE NO. 1 OIL RESERVOIR BRACKET

a.
A341282

Remove the 3 bolts and No. 1 oil reservoir bracket.


Hide 16470 11.REMOVE RADIATOR RESERVOIR

a.
A341284

Detach the clamp to disconnect the No. 2 water by-pass hose from the fan shroud.


b.

Slide the hose clamp and disconnect the No. 2 water by-pass hose from the radiator assembly.


c.
A341283

Slide the hose clamp and disconnect the water by-pass hose from the radiator assembly.


d.

Remove the 2 bolts and radiator reservoir.


Hide 32942 12.DISCONNECT NO. 1 OIL COOLER OUTLET HOSE (for Automatic Transmission)

a.
A341294

Slide the hose clamp and disconnect the No. 1 oil cooler outlet hose from the radiator assembly.


Hide 32941 13.DISCONNECT NO. 1 OIL COOLER INLET HOSE (for Automatic Transmission)

a.
A341293

Detach the clamp to disconnect the No. 1 oil cooler inlet hose from the fan shroud.


b.

Slide the hose clamp and disconnect the No. 1 oil cooler inlet hose from the radiator assembly.


Hide 16711 14.REMOVE FAN SHROUD

a.
A341286

Detach the 6 wire harness clamps.


b.
A341285

Loosen the 4 nuts holding the fan with fluid coupling assembly.


c.

Remove the fan and generator V belt.

Click hereEngine / Hybrid System>1GD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL


d.
A341287

Detach the 2 claws and 2 guides to disconnect the fan shroud from the radiator assembly.


e.

Remove the 4 nuts of the fan with fluid coupling assembly and remove the fan shroud together with the fluid coupling assembly.

NOTICE:

Do not allow the radiator assembly to interfere with other parts.



f.

Remove the fan pulley from the engine water pump assembly.


Hide 16572D 15.DISCONNECT NO. 2 RADIATOR HOSE

a.
A341290

Slide the hose clamp and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 16400 16.REMOVE RADIATOR ASSEMBLY

a.
A341291

Remove the 4 bolts.


b.
A341292

Detach the 2 claws and 2 guides to disconnect the cooler condenser assembly from radiator assembly.

NOTICE:
·

Do not allow the radiator assembly to interfere with other parts.

·

Do not apply any excessive force to the cooler condenser assembly and cooler pipe.




c.

Remove the radiator assembly from the vehicle.


Hide 16400B 17.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug from the radiator assembly.


b.

Remove the O-ring from the radiator drain cock plug.