Home › Engine / Hybrid System › 1KD-FTV STARTING › ENGINE SWITCH(for LHD)
RM33J0E _51 Engine / Hybrid System _038435 1KD-FTV STARTING _0191925 ENGINE SWITCH(for LHD) A

1KD-FTV STARTING  ENGINE SWITCH(for LHD)  REMOVAL  


PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 89611 3.REMOVE ENGINE SWITCH

a.
A351905

Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.


b.

Disconnect the engine switch connector and remove the engine switch.