Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
73150
1.INSTALL FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY (for 2 Person Bench Seat Type)
Install the front center seat lap type belt assembly with the bolt.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
| *a | Mark |
|
Front |
|
Protruding Part |
for 2 Person Bench Seat Type:
Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.
Install the front seat inner belt assembly RH with the bolt.
Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.
|
Front |
|
Protruding Part |
except 2 Person Bench Seat Type:
Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.
Install the front seat inner belt assembly RH with the bolt.
Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.
3.INSTALL FRONT SEAT ASSEMBLY RH