Home › Engine / Hybrid System › 1GD-FTV STARTING › ENGINE SWITCH
RM33J0E _51 Engine / Hybrid System _038427 1GD-FTV STARTING _0193848 ENGINE SWITCH A

1GD-FTV STARTING  ENGINE SWITCH  REMOVAL  


PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 89611 3.REMOVE ENGINE SWITCH

a.
A351905

Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.


b.

Disconnect the engine switch connector and remove the engine switch.