Home › Drivetrain › VF2CM TRANSFER / 4WD / AWD › TRANSFER ASSEMBLY › 2015.06–2015.11
RM33J0E _52 Drivetrain _038470 VF2CM TRANSFER / 4WD / AWD _0194120 TRANSFER ASSEMBLY A

VF2CM TRANSFER / 4WD / AWD  TRANSFER ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to perform this procedure with several people as the transfer assembly is very heavy.


PROCEDURE

Hide 36179 1.INSTALL TRANSFER CASE LOWER PROTECTOR

a.

Install the transfer case lower protector with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 36100 2.INSTALL TRANSFER ASSEMBLY

a.
C315986C01
0.667,0.25 0.833,0.25 0.833,0.25 1.333,0.667 true 2.5,2.833 2.667,2.167 2.667,2.167 2.833,2.167 true 0.5,0.177 0.813,0.333 0.313,0.156 10 false *1 2.917,2.083 3.229,2.24 0.313,0.156 10 false *1
*1 Clamp


for A750F:

Install the transfer assembly and 2 clamps with the 8 bolts.

NOTICE:

Do not damage the lip of the transfer adaptor oil seal.


Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


b.
C325885C01
0.75,0.167 0.917,0.167 0.917,0.167 1.271,0.677 true 2.125,2.375 2.292,2.375 2.292,2.375 2.646,2.885 true 0.521,0.083 0.833,0.281 0.313,0.198 10 false *1 1.927,2.292 2.24,2.49 0.313,0.198 10 false *1
*1 Clamp


for AC60F:

Install the transfer assembly and 2 clamps with the 8 bolts.

NOTICE:

Do not damage the lip of the transfer adaptor oil seal.


Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


c.
C331255C01
0.917,0.167 1.083,0.167 1.083,0.167 1.583,0.833 true 2,2.333 2.167,2.333 2.167,2.333 2.667,2.917 true 0.688,0.083 1,0.281 0.313,0.198 10 false *1 1.771,2.25 2.083,2.448 0.313,0.198 10 false *1
*1 Clamp


for R151F:

Install the transfer assembly and 2 clamps with the 8 bolts.

NOTICE:

Do not damage the lip of the transfer adaptor oil seal.


Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


d.
C325886C01
2.667,2.833 1.917,2.333 1.917,2.333 1.75,2.333 true 1.531,2.271 1.844,2.469 0.313,0.198 10 false *1
*1 Clamp


for RC60F / RC61F:

Install the transfer assembly and clamp with the 8 bolts.

NOTICE:

Do not damage the lip of the transfer adaptor oil seal.


Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


Hide 36407 3.CONNECT TRANSFER BREATHER HOSE SUB-ASSEMBLY

a.

Connect the 2 transfer breather hose sub-assemblies and attach the 2 clamps.


Hide 4.CONNECT WIRE HARNESS

a.
C331252

for A750F:

Connect the connector and attach the 3 clamps.


b.
C325896

for AC60F:

i.

Connect the connector and attach the 3 clamps.



c.
C331254

for R151F:

Connect the connector and attach the 4 clamps.


d.
C331264

for RC60F / RC61F:

Connect the connector and attach the 2 clamps.


Hide 37100 8.INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

Hide 11.CHECK FOR TRANSFER OIL LEAK