Home › Engine / Hybrid System › 1GD-FTV ENGINE CONTROL › ECM › 2015.06–2015.11
RM33J0E _51 Engine / Hybrid System _038420 1GD-FTV ENGINE CONTROL _0195868 ECM A

1GD-FTV ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668A 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89667A 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 89533 3.INSTALL 4 WHEEL DRIVE CONTROL ECU

Hide 89661 4.INSTALL ECM

a.

Install the ECM with the 4 wheel drive control ECU, with the bolt and 2 nuts.

Torque:
for Bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the 2 4 wheel drive control ECU connectors and 6 ECM connectors.


c.

Attach the 2 clamps.


Hide 55550 5.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55607 6.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Cover)