Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › 2015.06–2016.07
RM33J0E _58 Vehicle Interior _038506 INTERIOR PANELS / TRIM _0193459 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 55303B 1.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.
B413027

Connect the hood lock control cable and fuel lid lock open cable.


b.
B413026

Attach the guide and claw to connect the hood lock control lever sub-assembly and fuel lid lock open lever to the lower instrument panel sub-assembly.


c.

Connect the connector.


d.

Attach the guide to install the lower instrument panel sub-assembly.


e.

Install the 7 screws <B>, 2 bolts <C> and screw <D>.

B413025C02
2.396,2.99 2.594,3.146 0.198,0.156 10 true *b 0.917,2.615 1.135,2.76 0.219,0.146 10 true *c 5.021,2.063 5.208,2.219 0.188,0.156 10 true *d 0.5,0.906 0.698,1.063 0.198,0.156 10 true *a 3.688,3.135 3.885,3.292 0.198,0.156 10 true *b 6.844,1.708 7.042,1.865 0.198,0.156 10 true *b 5.427,1 5.625,1.156 0.198,0.156 10 true *b 4.469,0.979 4.667,1.135 0.198,0.156 10 true *b 1.583,1.625 1.781,1.781 0.198,0.156 10 true *b 0.188,1.354 0.385,1.51 0.198,0.156 10 true *b 6.344,3.177 6.542,3.323 0.198,0.146 10 true *c 6.604,1.167 6.802,1.323 0.198,0.156 10 true *a
*a Guide *b Screw <B>
*c Bolt <C> *d Screw <D>



Hide 55054 2.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

a.
B413021

Attach the claw to install the glove compartment door stopper sub-assembly.


Hide 55407C 3.INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

a.
B413024C01
0,0 0,0 false
V113147

Install in this Direction


Connect the connector.


b.

Attach the clip and claw to install the lower instrument cover sub-assembly as shown in the illustration.


Hide 55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.
B413020

Attach the hinge to install the glove compartment door assembly.


b.
B413018

Attach the claw to connect the glove compartment door stopper sub-assembly.


c.
B413016C01
0,0 0,0 false
V113147

Install in this Direction


Install the glove door stopper pin and twist it as shown in the illustration.

HINT:

Use the same procedure for both glove door stopper pins.



Hide 55607 5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.
B413015C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide.


b.

Attach the claw to install the No. 2 instrument panel under cover sub-assembly as shown in the illustration.


Hide 73900 6.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

Hide 55606 7.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

a.

Attach the claw to connect the DLC3.


b.
B413012C01
0.323,1.271 0.531,1.427 0.208,0.156 10 true *a 2.24,1.583 2.448,1.74 0.208,0.156 10 true *a
*a Screw <A>
V113147

Install in this Direction


Attach the guide, claw and clip to install the No. 1 instrument panel under cover sub-assembly as shown in the illustration.


c.

Install the 2 screws <A>.


Hide 55045 8.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (w/o Knee Airbag)

a.

Attach the claw to connect the DLC3.


b.
B415031C01
0.521,1.729 0.75,1.885 0.229,0.156 10 true *a
*a Screw <A>
V113147

Install in this Direction


Attach the clip and claw to install the lower instrument panel finish panel sub-assembly as shown in the illustration.


c.

Install the 2 screws <A>.


Hide 55420A 9.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.
B413009C01
0,0 0,0 false
V113147

Install in this Direction


w/o Audio:

i.

Connect the connector.


ii.

Attach the guide and clip to install the center instrument cluster finish panel assembly as shown in the illustration.


iii.
B416714

Install the 4 screws.



b.
B415037C01
0,0 0,0 false
V113147

Install in this Direction


w/ Audio, for Radio Receiver Type:

i.

Connect the connector.


ii.

Attach the guide and clip to install the center instrument cluster finish panel assembly as shown in the illustration.


iii.
B415035

Install the 4 screws.



c.
B415034C01
0,0 0,0 false
V113147

Install in this Direction


w/ Audio, for Radio and Display Type:

i.

Connect the connector.


ii.

Attach the guide and clip to install the center instrument cluster finish panel assembly as shown in the illustration.


iii.
B415032

Install the 4 screws.



Hide 84013A 10.INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55905J 11.INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 12.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 84140 13.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 58811A 14.INSTALL FRONT CONSOLE BOX (w/o Console Box Lid)

Hide 58901A 15.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/ Rear Console Box)

Hide 58810J 16.INSTALL CONSOLE BOX ASSEMBLY (w/ Console Box Lid)

Hide 55302A 17.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 18.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION