Home › Drivetrain › AC60F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM33J0E _52 Drivetrain _038466 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0196292 TRANSMISSION CONTROL CABLE A

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Install the transmission control cable from outside the vehicle body and attach the 3 claws of the cable retainer.


b.

Install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.
C323979

Connect the transmission control cable support to the vehicle body with the nut as shown in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


d.

Connect the ground wire to the vehicle body with the nut as shown in the illustration.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


e.
C326305N02
1.01,0.01 1.167,0.208 0.156,0.198 10 true N

Turn the control shaft lever LH clockwise until it stops, and then return the control shaft lever counterclockwise 2 notches to N.


f.

Connect the transmission control cable to the transmission control cable bracket with a new clip, and then connect the cable end to the control shaft lever LH with the nut.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY