Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › MONOLITHIC CONVERTER(w/ DPF)
RM33J0E _51 Engine / Hybrid System _038423 1GD-FTV EMISSION CONTROL _0201053 MONOLITHIC CONVERTER(w/ DPF) A

1GD-FTV EMISSION CONTROL  MONOLITHIC CONVERTER(w/ DPF)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343692

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


PROCEDURE

Hide 17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 53882F 4.REMOVE FRONT FENDER SEAL

a.

for 2WD:

Remove the 5 clips and front fender seal from the body.


b.

for 4WD and Pre-Runner:

Remove the 6 clips and front fender seal from the body.


Hide 17801 6.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 89481B 8.REMOVE DIFFERENTIAL PRESSURE SENSOR

Hide 89425 9.REMOVE EXHAUST GAS TEMPERATURE SENSOR

Hide 25733A 10.REMOVE NO. 1 VACUUM PIPE

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A344460

Remove the nut and clamp from the No. 1 vacuum pipe and No. 2 vacuum pipe.


b.
A344461

Using a 17 mm union nut wrench, remove the No. 1 vacuum pipe from the exhaust manifold converter sub-assembly.


Hide 25734 11.REMOVE NO. 2 VACUUM PIPE

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A344462

Using a 17 mm union nut wrench, remove the No. 2 vacuum pipe from the exhaust manifold converter sub-assembly.


b.
A358214

Remove the clamp from the pipe clamp.


Hide 17578B 12.REMOVE PIPE CLAMP

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345782

Remove the 3 bolts and pipe clamp from the engine cover bracket.


Hide 12631A 13.REMOVE ENGINE COVER BRACKET

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345783

Detach the 2 clamp and disconnect the engine wire from the engine cover bracket.


b.
A345784

Remove the 2 bolts and engine cover bracket from the cylinder head sub-assembly.


Hide 48691 14.REMOVE UPPER ARM BUSH HEAT INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345785

Remove the 2 bolt and upper arm bush heat insulator from the body.


Hide 89467B 15.REMOVE AIR FUEL RATIO SENSOR

Hide 17167 16.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345786

Remove the 3 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold.


Hide 17271 17.REMOVE NO. 1 TURBO INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345787

Remove the 3 bolts and No. 1 turbo insulator from the exhaust manifold and turbocharger sub-assembly.


Hide 17118 18.REMOVE NO. 2 EXHAUST PIPE SUPPORT STAY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345788

Remove the bolt, 2 nuts and No. 2 exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 17118 19.REMOVE EXHAUST PIPE SUPPORT STAY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345789

Remove the 3 bolts and exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 25051 20.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A345809

Remove the nut, exhaust pipe clamp and exhaust manifold converter sub-assembly from the turbocharger sub-assembly.


b.

Remove the gasket.