Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.11
RM33J0E _56 Audio / Visual / Telematics _044808 NAVIGATION / MULTI INFO DISPLAY _0219999 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Check if the system voice recognition success rate is low when recognizing a particular voice.

Result:
Result Proceed to
System voice recognition success rate is low with any voice. A
System voice recognition success rate is low only for a particular voice. B


HINT:
·

System voice recognition success rate varies depending on voice and pronunciation. This is not a malfunction.

·

When the voice recognition training function is enabled via the vehicle settings, it becomes easier to recognize the particular voice of a user.





A

2.CHECK MICROPHONE (OPERATION CHECK)

B

CONFIRM VEHICLE SETTINGS (TRAIN VOICE RECOGNITION)

2.CHECK MICROPHONE (OPERATION CHECK)
a.
E268457

Enter the "Microphone Check" screen. [Refer to Check Microphone] in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>OPERATION CHECK


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Push the recording switch and perform voice recording.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded for up to 5 seconds.



d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.



Result:
Proceed to
OK
NG



OK

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE