Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86860
1.INSTALL NAVIGATION ANTENNA ASSEMBLY
Attach the claws to install the navigation antenna assembly.
Install the 3 screws.
55844
2.INSTALL NO. 2 HEATER TO REGISTER DUCT
86808
3.INSTALL NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
Connect the connector.
Attach the clamps to install the No. 1 navigation antenna cord sub-assembly.
55085
4.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55084E
5.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55302A
6.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY