Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT BUMPER COVER
81150
2.REMOVE HEADLIGHT ASSEMBLY LH
|
Protective Tape |
Apply protective tape as shown in the illustration.
Remove the bolt and 3 screws.
|
Place Hands Here |
Place your hands at the location shown in the illustration, and disconnect the bracket from the seat of the screw.
Be careful not to break the bracket.
Pull the headlight assembly LH forward to remove it.
| *A | w/ Headlight Leveling |
Disconnect each connector and 2 wire harness clamps.