Home › Vehicle Exterior › LIGHTING (EXT) › TAIL AND STOP LIGHT BULB › from 2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189320 TAIL AND STOP LIGHT BULB A

LIGHTING (EXT)  TAIL AND STOP LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RH and LH sides.

·

The procedure listed below is for LH side.



PROCEDURE

Hide 81560 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

Hide 81561 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)

Hide 81551 3.REMOVE REAR COMBINATION LIGHT LENS RH (for Deck-less)

Hide 81550H 4.REMOVE TAIL AND STOP LIGHT BULB

a.
E316929C01
1.865,0.719 2.438,0.719 true 1.271,3.083 1.573,3.302 true 2.479,0.604 2.708,0.781 0.229,0.177 10 true *a 1.094,2.969 1.281,3.167 0.188,0.198 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


w/ Deck:

i.

Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


ii.
E316931C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.
E323555C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


for Deck-less:

Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.


Hide 81550H 5.INSTALL TAIL AND STOP LIGHT BULB

a.
E296855C02
0.927,1.135 1.427,1.135 false 2.135,1 2.635,1 false 2.698,0.906 3.01,1.063 0.313,0.156 10 false *a 0.74,1.042 1.052,1.198 0.313,0.156 10 false *b
*a Upper Protrusion
*b Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


w/ Deck:

i.

Align the upper protrusion of the tail and stop light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb.


ii.
E316932C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the tail and stop light bulb, turn the bulb clockwise to install the bulb.


iii.
E316930C01
1.177,0.865 1.594,0.708 true 1.188,0.5 1.583,0.583 true 1.938,3.333 2.354,3.177 true 0.99,0.781 1.198,0.979 0.208,0.198 10 true *a 1.01,0.396 1.198,0.573 0.188,0.177 10 true *b 2.375,3.073 2.594,3.26 0.219,0.188 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.



b.

for Deck-less:

i.
E296842C02
0.813,1.219 1.365,1.219 false 2.063,1.083 2.615,1.083 false 2.667,0.969 2.979,1.125 0.313,0.156 10 false *a 0.625,1.115 0.938,1.271 0.313,0.156 10 false *b
*a Upper Protrusion
*b Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


Align the upper protrusion of the tail and stop light bulb with the short cutout of the rear combination light body and the lower protrusion with the long cutout, and then insert the bulb to the rear combination light body.


ii.
E323556C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the tail and stop light bulb, turn the bulb clockwise to install the bulb.



Hide 81560 6.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

Hide 81561 7.INSTALL REAR COMBINATION LIGHT LENS LH (for Deck-less)

Hide 81551 8.INSTALL REAR COMBINATION LIGHT LENS RH (for Deck-less)