Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT BULB › from 2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189321 BACK-UP LIGHT BULB A

LIGHTING (EXT)  BACK-UP LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81560 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

Hide 81561 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)

Hide 81551 3.REMOVE REAR COMBINATION LIGHT LENS RH (for Deck-less)

Hide 81550N 4.REMOVE BACK UP LIGHT BULB

a.
E316937C01
2.271,0.729 1.833,0.729 true 1.563,3.323 1.125,3.323 true 2.313,0.635 2.51,0.823 0.198,0.188 10 true *a 0.917,3.24 1.115,3.438 0.198,0.198 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


w/ Deck:

i.

Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


ii.
E316939C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.
E323557C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


for Deck-less:

Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.


Hide 81550N 5.INSTALL BACK UP LIGHT BULB

a.
E296856C02
1,1.104 1.427,1.104 false 1.948,1.104 2.375,1.104 false 0.802,1 1.115,1.156 0.313,0.156 10 false *a 2.438,1 2.75,1.156 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


w/ Deck:

i.

Align the 2 protrusions on the back up light bulb with the 2 cutouts of the bulb socket and insert the bulb into the bulb socket.


ii.
E316940C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the back up light bulb, turn the bulb clockwise to install the bulb.


iii.
E316938C01
1.115,0.938 1.573,0.719 true 1.083,0.594 1.542,0.594 true 1.927,3.333 2.385,3.115 true 0.948,0.865 1.125,1.042 0.177,0.177 10 true *a 0.896,0.51 1.083,0.688 0.188,0.177 10 true *b 2.385,3.01 2.573,3.177 0.188,0.167 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.



b.

for Deck-less:

i.
E296841C02
0.969,1.146 1.438,1.146 false 1.979,1.146 2.448,1.146 false 0.76,1.042 1.073,1.198 0.313,0.156 10 false *a 2.5,1.052 2.813,1.208 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


Align the 2 protrusions on the back up light bulb with the 2 cutouts of the rear combination light body and insert the bulb to the rear combination light body.


ii.
E323558C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the back up light bulb, turn the bulb clockwise to install the bulb.



Hide 81560 6.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

Hide 81561 7.INSTALL REAR COMBINATION LIGHT LENS LH (for Deck-less)

Hide 81551 8.INSTALL REAR COMBINATION LIGHT LENS RH (for Deck-less)