Home › Engine / Hybrid System › 2TR-FBE EMISSION CONTROL › AIR SWITCHING VALVE › from 2016.07
RM33J0E _51 Engine / Hybrid System _053776 2TR-FBE EMISSION CONTROL _0261414 AIR SWITCHING VALVE A

2TR-FBE EMISSION CONTROL  AIR SWITCHING VALVE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
A343693

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.

·
A350542

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.



PROCEDURE

Hide 53882F 1.REMOVE FRONT FENDER SEAL RH

Hide 17705 2.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

Hide 17801 3.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17701 4.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 17344 5.DISCONNECT NO. 4 AIR INJECTION SYSTEM HOSE

a.
A346853

Slide the clip and disconnect the No. 4 air injection system hose from the air switching valve assembly.


Hide 17167 6.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A346854

Remove the 5 bolts and No. 1 exhaust manifold heat insulator.

HINT:
·

It is only necessary to move the No. 1 exhaust manifold heat insulator so that the No. 4 intake pipe can be removed in a later step.

·

It is not possible to fully remove the No. 1 exhaust manifold heat insulator in this step.




Hide 17117B 7.REMOVE NO. 4 INTAKE PIPE

a.
A346855

Remove the 4 nuts, No. 4 intake pipe and 2 gaskets.

NOTICE:

Be careful not to damage the installation surface of the gaskets.



Hide 25710 8.REMOVE AIR SWITCHING VALVE ASSEMBLY

a.
A346856

Disconnect the vacuum hose.


b.
A346857

Disconnect the air switching valve connector.


c.

Remove the 2 nuts and air switching valve assembly.


d.

Remove the No. 1 exhaust manifold heat insulator.